Seat assembly

How to assemble

1. Screw part 6 in the hole in the center of part 10 so that the lower edge of part 6 coincided with the lower edge of part 10. You can use the plastic screw driver 12 (comes with the seat).
2. Screw nut 4 on part 6 coming out of part 10 so that there is at least 35 mm of the top of part 6.
3. 3. Put part 7 on the free end of part 6.
4. Insert part 5 in part 1 and fix part 7 with 4 bolt screws 11 (come with the seat) to part 1.
5. Screw part 5 attached to part 1 on the free end of part 6. Remember that the bigger the distance between parts 1 and 10- the bigger the swinging amplitude. Before you gain experience we recommend you to tightly attach part 5 to part 6. After 1-2 weeks using the seat you can increase the distance between parts 1 and 10 screwing part 5 off part 6. For reliability minimum 10 mm of part 5 must be attached to part 6.
6. Tighten nut 4 to part 7. Mobile seat is ready to use. Take the seat down in the reverse order. The seat may creak if the weight of the sitting person is too heavy. Use any non-toxic grease on the top of part 5 (not included).